symphony e10 stock firmwaer
symphony e10 stock firmwaer
Mobile Flash solution
SPD CPU:
1. Firstly setup the SPD USB driver your pc. (symphony e10 Firmwaer Download Link )
2. Connect the mobile.
to pc using USB data cable.
Mobile must be switched off.
and disconnect the battery.
from mobile.
3. Open the
software tools.
1. Firstly setup the SPD USB driver your pc. (symphony e10 Firmwaer Download Link )
2. Connect the mobile.
to pc using USB data cable.
Mobile must be switched off.
and disconnect the battery.
from mobile.
3. Open the
software tools.
(symphony e10 e10-1-xxx-v01.5-v09.0–20150825 )
crack/box for flash. .
4. Browse the flash file from your pc. mobile firmwaer passward link
5. Press the boot key to connect for flash. ( Download SPD Driver).
6. When flash will be done. Please disconnect the mobile battery and connect again. If Mobile battery is attached, then press the volume up + down + Power button in the same time until restart the mobile.
crack/box for flash. .
4. Browse the flash file from your pc. mobile firmwaer passward link
5. Press the boot key to connect for flash. ( Download SPD Driver).
6. When flash will be done. Please disconnect the mobile battery and connect again. If Mobile battery is attached, then press the volume up + down + Power button in the same time until restart the mobile.
No comments